Applying Chic Marine Boat Polymer Wax with a Dual Action Polisher

Applying Chic Marine boat polymer wax with a dual action polisher is a straightforward process that can provide excellent protection and a glossy finish for your boat's surface. Here's a simple guide in three steps, emphasizing the importance of using a wet foam pad to activate the polymer:

1. Prepare the Surface and Equipment:

• Begin by ensuring that your boat's surface is clean and dry. Wash the boat thoroughly with a mild detergent or boat soap to remove any dirt, grime, or residue. Rinse the boat with clean water and allow it to dry completely.
• Next, prepare your dual action polisher by attaching a clean, soft foam polishing pad to the backing plate. It's important to use a wet foam pad for this process to activate the polymer effectively.
• Wet the foam pad thoroughly with clean water before applying the wax. The moisture helps activate the polymer components in the wax, allowing for better adhesion to the boat's surface and enhanced protection.

2. Apply Chic Marine Boat Polymer Wax:

• Apply a small amount of Chic Marine boat polymer wax onto the wet foam pad. Use an amount that is sufficient to cover a small section of the boat's surface, typically a few square feet at a time.
• Turn on the dual action polisher at a low speed setting and place the wet foam pad against the boat's surface. Begin spreading the wax evenly across the surface in overlapping, circular motions.
• Work methodically, covering one section at a time to ensure thorough coverage. Continue spreading the wax until the entire surface has been treated.

3. Buff to a Glossy Finish:

• Once the wax has been evenly spread across the surface, increase the speed of the dual action polisher to a moderate setting.
• Continue buffing the waxed surface using overlapping passes, applying light to moderate pressure. The dual action motion of the polisher will help to distribute the wax evenly and achieve a uniform shine.
• After buffing each section, inspect the surface for any missed spots or uneven application. If necessary, apply additional wax to the wet foam pad and touch up any areas that require extra attention.
• Once the entire surface has been treated and buffed to a glossy finish, allow the Chic Marine boat polymer wax to cure according to the manufacturer's instructions before exposing the boat to water or other environmental elements.

By following these three steps and using a wet foam pad with your dual action polisher, you can effectively apply Chic Marine boat polymer wax to your boat's surface, ensuring long-lasting protection and a brilliant shine.